Metal Sheet Tower

Semi-automated vertical storage system Metal Sheet Tower. Designed for storage of sheet material.

The tower with a selectable floor plan and height, consists of a very robust welded structure, adapted on the inside for vertical storage of individual handling units. The containers of the handling units are of welded construction, dimensioned according to typical transport formats and weights of steel plate. The extractor, which is part of the lifting manipulator, moves the handling unit horizontally from/to the storage position in the tower, while the lifting manipulator moves the unit vertically from/to the transfer position. The design of the (mobile) dispensing table at the transfer point provides a "lift" of the material on the container, allowing whole bundles of boards to be transferred using a forklift truck. The handling of individual boards is usually carried out by a suction vacuum manipulator or magnet. For multi-tower systems, the transfer point can be designed as front, rear and/or side (depending on the tower design options).

Specifications of Metal Sheet Tower MONO

Container load capacity - 1 500 kg, 3 000 kg, 5 000 kg
Material dimensions - 1 250 x 2 500 mm, 1 500 x 3 000 mm, 2 000 x 3 000 mm, 2 000 x 4 000 mm, 2 000 x 6 000 mm
Max. height of the device - 7 500 mm
Type of transfer point - frontal (travel optional)Material lift - YesModule control SW - OptionalDevice sensors - Optional

Metal Sheet Tower DOUBLE

Container load capacity - 1 500 kg, 3 000 kg, 5 000 kg
Material dimensions - 1 250 x 2 500 mm, 1 500 x 3 000 mm, 2 000 x 3 000 mm, 2 000 x 4 000 mm, 2 000 x 6 000 mm
Max. height of equipment - 12 000 mm
Transfer point type - front mobile (optional: rear/side)Material lift - OptionalModule control SW - RecommendedEquipment sensors - Optional

Metal Sheet Tower MULTI

Container load capacity - 1 500 kg, 3 000 kg, 5 000 kg
Material dimensions - max. width 1 000 mm, max. length 6 000 mm
Max. height of equipment - 12 000 mm
Transfer point type - front mobile (optional: rear/side)Material lift - OptionalModule control SW - RequiredEquipment sensors - Optional

Working principle "goods to operator "
Efficient use of height
High capacity on minimum floor space
Easy material handlingHigh material protection
Management of warehouse contents including residues
Easy operation and maintenance of the system

Metal Sheet Tower

Semi-automated vertical storage system Metal Sheet Tower. It is most often used for sheet metal storage.

Case study | MULTI TOWER

The MS MULTI Tower system of 4 storage towers with 5 operator areas. Controlled by a PLC with its own intuitive control interface for controlling and diagnosing the storage system and communication interface connect to WMS .